Multifunctional Powerful Power Bank & Mini IPS/UPS for Router/ONU Making At Home
Multifunctional Powerful Power Bank & Mini IPS/UPS for Router/ONU Making At Home
Creating a multifunctional power bank with a Mini IPS/UPS for your router or ONU (Optical Network Unit) at home can be a useful DIY project. While I can't provide information directly from a specific blog, I can offer you a general overview of how to go about it:
Materials:
1. A power bank with a high-capacity lithium-ion battery.
2. A mini inverter or UPS (Uninterruptible Power Supply).
3. Connectors and wiring.
4. A router or ONU.
Steps:
1. Disassemble the power bank to access its battery. Be careful not to damage the battery during this process.
2. Identify the positive and negative terminals of the power bank's battery and the UPS or mini inverter.
3. Connect the positive terminal of the power bank's battery to the input of the UPS or mini inverter. Connect the negative terminal in the same way.
4. Attach connectors to the output of the UPS or mini inverter. You may need a connector that fits your router or ONU's power input.
5. Connect your router or ONU to the UPS or mini inverter via the connector.
6. Reassemble the power bank, ensuring the connections are secure.
7. Charge the power bank fully before use.
This setup will allow your router or ONU to continue operating during power outages. Keep in mind that you're modifying electronic devices, which can be risky, so proceed with caution, and ensure safety precautions are taken to avoid electric shock or damage to equipment. Always check the specific requirements of your router or ONU to make sure they are compatible with the power bank and mini IPS/UPS you're using.
USB QC3.0 QC2.0 USB DC-DC Buck Converter Charging Step Down Module 6-32V 9V 12V 24V to Fast Quick Charger Circuit Board 5V
Product Features
· Input voltage range: 6V-32V
· Output voltage: default 5V, automatically adjust between 3-12V after triggering fast charge
· Output power: up to 24W (5V/3.4A, 9V/2.5A, 12V/2A, etc.)
· Output voltage cable compensation function
· Conversion efficiency: 90%-97%
· Support multiple fast charging protocols
· Input overvoltage and undervoltage protection
· Input overcurrent protection
· Output overcurrent, short circuit protection
· Machine over temperature protection
Support fast charge agreement
· Support DCP protocol, BC1.2, Apple, Samsung protocol
· Support Huawei Fast Charge Protocol FCP/SCP
· Support Huawei Fast Charge Protocol AFC
· Support Spreadtrum Fast Charge Protocol SFCP
· Support Qualcomm QC2.0 and 3.0
· Support MTK PE1.1/PE2.0
.jpg)
Applications
Dual-port independent output, support protocol: QC2.0, QC3.0, MTK PE1.1/2.0, FOR Apple, FOR Samsung AFC, FOR Huawei FCP, FOR Spreadtrum SFCP
1. Input voltage: DC 6~30V
2. Output voltage: default 5V, adjust range 3~12V according to fast charging protocol
3. Output capacity: single-port rated current 2.4A, rated power 24W4. Protection measures: Output overvoltage protection, limit the output voltage does not exceed 13V (in the case of chip failure); input with a fuse.
No comments